- 2 tamper loops
- 100 Mbit Ethernet
- An uplink port connected, 1.5 kV isolated separated
- 4-port PoE (15.4 W each)
- Optocoupler input for resetting after Sabotage (12 to 24 V)
- Reset button
- LED‘s for status display
- 1 NC relay contact for feedback Gebäusemanagement (24 V, 3 A)
- 2-pole NO relay contact for Cut-off device in case of sabotage (24 V, 3 A)
- Top hat rail mounting
Optionally a separate power supply (33-1419) to power the LANSecureSwitch is available. (Please order separately)
The module monitors 2 switches on contact and resistor value (either 0 Ohm eg. 10 kOhm) and cuts in case of sabotage all 8 leads of the LAN cable as well as a 24 V DC output.
A tamper switch kit must be ordered separately according to the respective station which need to be protected.