LAN-Secure-Switch

470,00 

Complete unit for mounting on top hat rail for safe shutdown exterior IP ports in case of sabotage.

Ready for shipment in on request

SKU: 33-1381 Categories: ,

Description

  • 2 tamper loops
  • 100 Mbit Ethernet
  • An uplink port connected, 1.5 kV isolated separated
  • 4-port PoE (15.4 W each)
  • Optocoupler input for resetting after Sabotage (12 to 24 V)
  • Reset button
  • LED‘s for status display
  • 1 NC relay contact for feedback Gebäusemanagement (24 V, 3 A)
  • 2-pole NO relay contact for Cut-off device in case of sabotage (24 V, 3 A)
  • Top hat rail mounting

Optionally a separate power supply (33-1419) to power the LANSecureSwitch is available. (Please order separately)

The module monitors 2 switches on contact and resistor value (either 0 Ohm eg. 10 kOhm) and cuts in case of sabotage all 8 leads of the LAN cable as well as a 24 V DC output.

A tamper switch kit must be ordered separately according to the respective station which need to be protected.

Additional information

Weight500 g
Dimensions52 × 200 × 92 mm
Betriebsspannung

18 up 50 V DC

Strom / Leistung

65 VA

Temperatur

0 °C to 60 °C

Montage

Rail mounting