Stele 1100mm x 310mm


Complete V4A stele including floor unit, 4 screw sets with plugs, with module frames ST 2×2 (suitable for four modules).

Ready for shipment in on request

SKU: 33-1531D Categories: ,


  • Baudisch columns to accommodate four ModularSteel modules that can be installed flush to the surface of the column
  • Material: V4A stainless steel, brushed, polished direction vertical
  • Type of protection:
  • IP54 (standard)
  • Except IP65 rear (extension)
  • The steel profile is topped with a flange, this is round about 1 mm (drip edge). Material: Aluminum, sandblasted and polished and anodized black
  • The steel profile is sitting down on a flange, this is about 1mm round. The weight of the stele is derived on the flange. This is fixed internally to the crossbars of the floor attachment
  • Optional there is a base cover (see stele accessories)

Mounting: The columns are placed on a floor mounting, 2 guide tubes (steel, d = 38 mm) are used to fix and stabilize

  • Installation on finished floor: The unit sits about 53 mm over this on base and hood
  • Mounting on structural floor: The floor attachment is anchored directly on this, the floor structure must be a minimum of 55 mm, maximum 155 mm. With stronger floor structure must be lined ground fixing.
  • Cable entry: Centered round cable entry on bottom,
    d = 68 m

Additional information

Weight 10500 g
Dimensions 80 × 310 × 1100 mm

Stainless steel (V4A)


-20 °C to 55°C